Barco R59116700-01 Manuale Utente

Addendum

If a connection is possible with the Display Control application either remotely or locally, you

can use the Server Application Manager dialog to find out if the server application has been

installed, is running and which port and port name it is using and if an error occurred. In the

Display Control application, go to the Configure menu and select Server Applications. 
If a connection is not possible with the Display Control application, you will need to look at

the application event viewer on the Display Control server. 

This error message suggests that an attempt to open a communication port failed because

it is already in use.
If the Display Control server has not been activated or the networking has been disabled in

the Display Control Administrator dialog or Display Control has not been activated, the

problem is with the port name.
If networking is enabled, the problem could be with either the port number or the port

name.
You can find out the port number and the port name that the server application is using

through the Server Application Manager dialog or the application event viewer.
You can find out which port numbers are in use on a machine with the netstat command.

There is no way to find out which port names are in use. 
Use the Server Application Manager to change  the  port  number  and/or  port  name  and

restart the server application.

This is displayed when trying to contact a server application that has been stopped after it

had been connected to successfully. Go to the Server Application Manager dialog and start

the server application again.

Prior to making any changes to the resolution, it is recommended that the ECU server be

stopped beforehand. This can be done using the Server Application Manager dialog. 
The servers retain resources on the graphics card which my not be available if the resolution

is changed.