Cisco Systems 10.0(1) Manuale Utente
Add Cisco IOS SCCP Gateway
Use the following procedure to add and configure a Cisco IOS SCCP gateway to Cisco Unified Communications
Manager. The following Cisco IOS gateways support SCCP:
Manager. The following Cisco IOS gateways support SCCP:
• Cisco IOS 269xGateways
• Cisco IOS 3725 and 3745 Gateways
• Cisco VG224 Gateway
Before You Begin
Configure a Cisco IOS SCCP gateway by adding the gateway first to Cisco Unified Communications Manager.
Afterward, configure the gateway by using the Cisco IOS command-line interface (CLI). For procedures and
commands that are required to perform this configuration, see the configuration documentation that is supplied
with the gateway.
Afterward, configure the gateway by using the Cisco IOS command-line interface (CLI). For procedures and
commands that are required to perform this configuration, see the configuration documentation that is supplied
with the gateway.
Procedure
Step 1
Choose Device > Gateway.
The Find and List Gateway window displays.
The Find and List Gateway window displays.
Step 2
Click Add New.
The Add a New Gateway window displays.
The Add a New Gateway window displays.
Step 3
From the Gateway Type drop-down list box, choose one of the following SCCP gateways:
a) Cisco IOS 269x
b) Cisco IOS 3725 and 3745
b) Cisco IOS 3725 and 3745
Step 4
From the Protocol drop-down list box, choose SCCP.
Cisco IOS SCCP gateways support SCCP for interfacing to the PSTN or other non-IP devices, depending on
the gateway model and the type of installed network modules and voice interface cards (VICs). A subsequent
web window provides configuration for the interface.
Cisco IOS SCCP gateways support SCCP for interfacing to the PSTN or other non-IP devices, depending on
the gateway model and the type of installed network modules and voice interface cards (VICs). A subsequent
web window provides configuration for the interface.
Step 5
Click Next.
The Gateway Configuration window displays for this SCCP gateway.
The Gateway Configuration window displays for this SCCP gateway.
Step 6
Enter the appropriate settings and choose the type of network modules that are installed in each slot, as
described in
described in
Table 85: Cisco IOS SCCP Gateway Configuration Settings , on page 498
, including any
product-specific configuration settings.
Step 7
Click Save.
The Gateway Configuration window updates and displays drop-down list boxes with options for configuring
the type of voice interface cards (VICs) in each subunit of each network module.
The Gateway Configuration window updates and displays drop-down list boxes with options for configuring
the type of voice interface cards (VICs) in each subunit of each network module.
The available choices depend on the type of network modules that are configured in the Gateway Configuration
window.
window.
Step 8
From the drop-down list boxes, choose the type of VICs that are installed in each subunit and click Save.
The window updates to add links for configuring endpoint information and ports for the chosen type of VICs.
The window updates to add links for configuring endpoint information and ports for the chosen type of VICs.
Cisco Unified Communications Manager Administration Guide, Release 10.0(1)
OL-29000-01
571
Add Gateway to Cisco Unified Communications Manager