TEAC LP-P1000 Manuale Utente

 

e

If the file information uses Japanese, Chinese or 
other double-byte characters, playback is possible 
but the name will not be shown correctly.

 

e

 Refer to the Bluetooth device’s operation manual.

 

e

 Put this unit into standby and turn the other 
Bluetooth device off and on once. Then, try pairing 
again.

 

e

 Turn off all Bluetooth devices other than the one 
you are trying to pair the unit with.

 

e

 After deleting the “LP-P1000” data from the other 
Bluetooth device, try pairing again.

 

e

 Confirm that the other Bluetooth device is on and 
its Bluetooth function is enabled.

 

e

 Are the unit and the other Bluetooth device too far 
apart? Is there a wall or other obstruction between 
them? 
As much as possible, use them close together in an 
environment without obstructions.

 

e

Put the unit into standby and then on again.

 

e

 Unpair the “LP-P1000” from the Bluetooth device 
and follow the instructions in “Pairing with another 
Bluetooth device” on page 44.

 

e

 Is there a wireless LAN, other Bluetooth device, 
microwave oven or similar electronic equipment 
nearby? Keep such devices as far away as possible.

 

e

 Reduce the distance between the other Bluetooth 
device and this unit during use.

 

e

 Try moving the other Bluetooth device and this 
unit.

 

e

Tune in the station properly.

 

e

 If FM broadcast reception is poor, try relocating the 
FM antenna. 

 

e

 If AM broadcast reception is poor, try changing the 
orientation of the AM antenna.

 

e

Confirm that the FM antenna cable has been con-
nected correctly.

 

e

If a TV is near the unit, turn the TV off.

 

e

Press the FM MODE button to select stereo.

 

e

The signal from the station might be poor. Adjust 
the position of the FM antenna and check whether 
the FM antenna cable has been connected 
correctly.

 

e

 Confirm that the stylus cover (made of white plas-
tic) has been removed. 

 

e

Clean the stylus (page 17).

 

e

If the stylus is worn-out, replace it. 

 

e

 Set the rotation speed (RPM) to match the record 
(page 46). 

 

e

 Vibrations will cause skipping.  Place this unit in a 
stable location. 

 

e

If the record is dirty, wipe it clean. 

 

e

Do not use scratched records.

 

e

 Use a coin or other tool to turn the transport lock-
ing screw clockwise until it stops.