Sharp PN-E703 Manuale Utente

17

E

n

When the monitor is turned on for the first time after being 

shipped from the factory, the mode setting screen will be 

displayed. 
(1)Press 

 or 

 to select YES or NO.

(2)Press 

ENTER

.

YES:

•  STANDBY MODE is set to LOW POWER.

•  Compared to when set to STANDARD, the current 

consumption is reduced while the monitor is in standby 

mode/input signal waiting mode, but the startup/return time 

from standby mode/input signal waiting mode becomes 

longer.

•  While the monitor is in standby mode, control via LAN will 

be disabled.

•  While the monitor is in standby mode/input signal waiting 

mode, only certain RS-232C commands can be used.

•  Depending on the input signal, the monitor may not switch 

to input signal waiting mode and may not return from input 

signal waiting mode.

NO:

•  STANDBY MODE is set to STANDARD.

•  Compared to when set to LOW POWER, the startup/

return time from standby mode/input signal waiting mode 

is reduced, but more power will be consumed in standby 

mode/input signal waiting mode.

n

•  If the time has yet to be set when the monitor is first turned 

on, the date/time setting screen appears. Set the date and 

time.

/

/

OK···[ENTER]   CANCEL···[RETURN]

:

   

:

1.  Press 

 or 

 to select the date and time, and 

press 

 or 

 to change the numerical values. 

2. Press 

ENTER

 .

•  Be sure to set the date and time.

•  The date/time setting screen will close automatically if 

no operation is performed for about 15 seconds. The 

date and time can be set using DATE/TIME SETTING 

from the SETUP menu when the date/time setting screen 

disappears.

TIPS

• 

Set the date in “Month/Day/Year” order.

• 

Set the time on a 12-hour basis.

• 

The clock is maintained by the internal battery.

• 

If you already set the time but the date/time setting 

screen appears when the power is turned on, the 

internal battery may be exhausted. Please contact an 

authorized 

SHARP

 servicing dealer or service center for 

assistance with battery replacement.

• 

Estimated service life of the internal battery: About 5 

years (depending on monitor operation)

• 

The initial battery was inserted at the factory when the 

monitor was shipped, so it may run out of power before 

its expected operation life.

Power on/power off operations can be disabled in order to 

protect the monitor from an accidental power off. Set the 

ADJUSTMENT LOCK in FUNCTION menu to “ON 2”. (See 

page 32.)