Toshiba D-VR610KU Manuale Utente

 Use [K / L] to enter the date, then 

press [B].

 Use [K / L / { / B] or [the Number 

buttons] to enter the start and end 
time, then press [B].

•  You cannot make a program whose recording 

time exceeds 12 hours.

 Use [K / L] to select an appropriate 

external input (L1/L2) to which your 
external tuner is connected, then 
press [B].

 Use [K / L] to select a recording media 

(“DVD” or “VCR”), then press [B].

 Use [K / L] to select a recording 

Refer to “Recording Mode” on page 33 for DVD 
or “Recording” on page 99 for VCR.
•  You can check the remaining recordable space 

of the disc when you select the recording 
mode.

When “Auto” is selected as a recording mode, the unit 
calculates how much time is available on the disc and 
determines the appropriate recording mode to 
complete recording the program.

•  “Auto” is only available for one program in the timer 

program list. 

•  The recording may be cut short, when the available 

recording space of the disc is too limited.

Your program setting will be stored.
•  To set another program, repeat steps 2 to 7.
•  To exit, press [TIMER PROG.] or [SETUP].
•  When 2 or more programs are overlapped, 

“Timer program overlapped” appears, and the 
overlapped program will be displayed in blue. 
To correct the timer program refer to 
“Checking, canceling, or correcting the timer 
programming information” on page 40.

 will appear on the front panel display, while this 

unit waits to make the recording.

“VCR” will appear 

on the front panel display 

if VCR 

timer recording have been set.

When pressing [L] at 

the current date, the 

date will change as 

follows.

e.g.) January 1st

E9KGAUD_D-VR610KU_EN.indd   39

E9KGAUD_D-VR610KU_EN.indd   39

2007/12/18   17:10:13

2007/12/18   17:10:13