Husqvarna 570 EPA III Manuale Utente

36 – English

°°°°C (23°°°°F) or colder:

For running the machine in cold weather or powder snow, 
a special cover is available, which is mounted on the 
starter housing. This reduces the intake of cold air and 
prevents large amounts of snow from being sucked in.

CAUTION! If the special winterising kit has been fitted or 
any measures have been taken to increase the 
temperature these changes must be reversed before the 
machine is used in normal temperature conditions. 
Otherwise there is a risk of overheating, resulting in 
severe damage to the engine.

IMPORTANT! Any maintenance other than that described 
in this manual must be carried out by your servicing dealer 
(retailer).

On models with the model code XPG both the front 
handle bar and the rear handle are equipped with 
electrical heating coils. These are supplied with electricity 
from a generator built into the chain saw.

If this chain saw has the model code XPG then it is 
equipped with an electrically heated carburettor. The 
electrical heating prevents icing in the carburettor. A 
thermostat regulates heating so that the carburettor 
always has the correct working temperature.

B

A

C