Husqvarna 966451906 Manuale Utente

32

 - English

D D

D

D

E

Repair Instructions

Lower the oil filter in place and replace the oil pump 

as outlined in figure 19 and tighten the screws.

Fit the pump drive wheel, the needle bearing, the 

drive sprocket, the clutch drum and the clutch, us-

ing a tightening torque of 25 Nm.

Adjust the oil pump. See Figure 21.

Fit the clutch. See the “Assembling the centrifugal 

clutch” chapter.

Fit the chain, bar and clutch cover.

The intake system consists of:

•  The inlet manifold, A 
•  The partition wall, B 
•  The intake flange, C 
   See Figure 22.

Dismantle the cylinder cover.

Loosen screws D and the movement limiter E as 

outlined in figure 23. Loosen the ignition cable.

Fig 21

Fig 22

Fig 23