EarthQuake CS3816 Manuale Utente

Check for parts online at

www.getearthquake.com or call 800-345-6007 M-F 8-5

Operator's Manual

CS3814, CS3816, CS4116 Chainsaws

filling the Bar and chain oil reserVoir

1. While the engine is cool for re-fueling, clean debris from area

around the bar and chain oil cap.

2. Loosen oil cap slowly.
3. Carefully add bar and chain oil without spilling.
4. Do not fill oil reservoir completely full; allow space for oil to

expand.

5. Replace cap and tighten. Wipe off any spilled oil before starting

engine.

Note: Do not use waste or recycled oil. Waste or recycled oil

could contain contaminants which will cause damage to the

oil pump.

Warning

chain Brake Will not preVent a kickBack. in the

eVent of a kickBack, the chain Brake is designed

to reduce the risk of injury to the operator.

Warning

do not modify or alter the functionality of

the throttle interlock in any Way. doing so

Will alloW accidental engagement of the

throttle Which Will result an unexpected

operation of the saW chain.

Warning

chain catcher is intended to preVent injury

in the eVent of a chain malfunction. neVer

operate a saW Without a chain catcher.

replace if missing or Badly damaged.

operation

filling fuel tank

1. Shut off engine and allow engine to completely cool before

refilling the fuel tank.

2. Move to a well-ventilated area, outdoors, away from flames

and sparks.

3.  Clean debris from area around the fuel cap.
4.  Loosen fuel cap slowly.
5.  Carefully add fuel without spilling.
6.  Do not fill gas tank completely full; allow space for fuel to

expand.

7. Immediately replace fuel cap and tighten. Wipe off spilled

fuel and allow to dry before starting engine.

the saw chain needs to stay lubricated during operation of

the unit. Aside from the fuel reservoir on the chainsaw, there

is also a bar and chain oil reservoir. Use only oil that has been

designed specifically for use with chainsaws. Bar and chain oil

has chemical properties which allow it to adhere to the saw

chain and provide better lubrication while the chain is in motion.

the saw is equipped with an adjustable automatic oiler. The

oiler and oil reservoir are designed such that a full tank of fuel

will run out before a full tank of oil. This ensures that the bar

and chain will receive a constant flow of oil during operation.

Always top off your oil reservoir when re-fueling.