IBM 343 Manuale Utente
Upgrading the Hardware
71
Removing and Installing Memory
The server board supports only PC133-compliant SDRAM. Install from 128 MB to 6 GB of
registered memory, using up to six single- or double-banked DIMMs.
registered memory, using up to six single- or double-banked DIMMs.
DIMMs must be installed in pairs in the following order: 1A-1B, 2A-2B, and 3A-3B as shown in
Figure 16. The DIMM sockets are further identified on the board’s silkscreen.
Figure 16. The DIMM sockets are further identified on the board’s silkscreen.
Installed DIMMs must be the same speed and must all be registered. For a list of supported
memory, call your service representative or visit the IBM Support website.
memory, call your service representative or visit the IBM Support website.
OM11790
3A
1B
2B
3B
1A
2A
Figure 16. Installing DIMMs