Zenoah EXZ2610DL Manuale Utente

GB-31

EXZ2610DL

• The reduction gears are lubricated by multipurpose,

lithium-based grease in the transmission. At every 20
hours of use, supply the transmission with new grease.

• Remove the cutter holders before installing new

grease to arrange for old grease to exit.

• When removing and installing the cutter holder (a),

use care not to allow any dirt and dust entering in to
the transmission.

Aged fuel is one of major causes of engine starting fail-
ure. Before storing the unit, empty the fuel tank and run
the engine until it uses all the fuel left in the fuel line and
the carburetor. Store the unit indoor taking necessary
measures for rust prevention.

Case 1. Starting failure

fuel tank

→ incorrect fuel

→ drain it and use correct fuel

fuel filter

→ fuel filter is clogged

→ clean

carburetor adjustment screw

→ out of normal range

→ adjust to normal range

sparking (no spark)

→ spark plug is fouled/wet

→ clean/dry

→ plug gap is incorrect

→ correct (GAP: 0.6 ~ 0.7 mm)

spark plug

→ disconnected

→ retighten

Case 2. Engine starts but does not keep running/hard re-starting

fuel tank

→ incorrect fuel or staled fuel → drain it and use correct fuel

carburetor adjustment screw

→ out of normal range

→ adjust to normal range

muffler, cylinder (exhaust port)

→ carbon is built-up

→ wipe away

air cleaner

→ clogged with dust

→ wash

cylinder fin, fan cover

→ clogged with dust

→ clean

When your unit seems to need further service, please consult with our ZENOAH service shop in your area.

When disposing your machine, fuel or oil for the machine,
be sure to allow your local regulations.