Zenoah BK3410FL Manuale Utente

■ ATTACHING THE SHOULDER STRAP (SE1)
1. Pass the ring of the shoulder strap through the

hook(A) and fix it by the bolt securely.

2. Set the hook(B) of each shoulder strap to the D-rings

on the frame.

■ ATTACHING THE LINER
1. Remove the bolt located on the joint of the outer pipe.

(SE2)

2. Match the groove of the liner with the threaded hole

and fix with screw securely. (SE2)

3. While rotating the flexible shaft located on the

opposite end from the liner, insert the flexible shaft
into the joint until it is tightly connected.  (Note that it
is normal at this time for the flexible shaft not to
project from the liner.) (SE3)

5. To connect the clutch housing to the liner, lay the liner

out straight, align the flexible shaft with the angular
hole on the side of the clutch drum, and insert the
liner into the clutch housing, being careful to make
sure that the hole on the end of the liner is facing
directly upwards.  When the hole reaches a point
directly below the stopper, you will hear a clicking
sound as the stopper moves into the hole to fix the
liner into place. (SE4)

• If you experience any difficulty in inserting the liner,

pull out the liner, rotate the flexible shaft slightly, and