Zenoah TR2300 Manuale Utente

■ CONNECTING SWITCH WIRES
• Connect the switch wires between the engine and

the main unit. Pair the wires of the same color.

■ INSTALLING HANDLE
• Mount the handle to the shaft tube and clamp it at a

location that is comfortable to you. (SE1)

■ INSTALLING DEBRIS GUARD
• Put the debris guard on the gear box, attach it with

the screws and hardware provided. (SE2)

■ INSTALLING CUTTING HEAD (SE3)
1. While locking the gear shaft, by inserting the

supplied tool into the upper holder on the gear box,
loosen and remove the hexagon nut(left-handed)

2. Fit the line head assembly to the gear shaft over the

holders. Hand-tighten it securely. 

You need not holder (B) and nut when installing the
cutting head.