Zenoah BK4310FL Manuale Utente
15
■ STOPPING THE ENGINE
1. Return the throttle lever to the idling position.
2. Push the engine switch button. (OP5)
3. Close the fuel cock.
1. Return the throttle lever to the idling position.
2. Push the engine switch button. (OP5)
3. Close the fuel cock.
(1) Engine switch button
■ EQUIPPING THE SHOULDER STRAP (OP6)
1. Hold the main pipe with your right hand. Hang the left
1. Hold the main pipe with your right hand. Hang the left
strap on your left shoulder.
2. Change your hand to hold the main pipe with your left
hand. Hang the right strap on your right shoulder.
■ CUTTING OPERATION
1. Always wear eye protection such as safety
goggles. Never lean over the rotating cutting
head. Rocks or other debris could be thrown into
eyes and face and cause serious personal injury.
head. Rocks or other debris could be thrown into
eyes and face and cause serious personal injury.
2. Keep the debris guard attached in place at all
times when the unit is operated.
BLADE USAGE (OP7)
• Always cut by guiding the head from your right to left.
• A metal blade cut best up to the point 1/3 from the
• A metal blade cut best up to the point 1/3 from the
edge. Use that area for cutting shrubs, tough and
thick weeds. For cutting young grass, you can use up
to 2/3 from the tip of blade.
thick weeds. For cutting young grass, you can use up
to 2/3 from the tip of blade.
• Adjust the engine speed according to the cutting
objects. Cut the young grass at middle speed, and cut
shrubs or tough and thick weeds at high speed.
shrubs or tough and thick weeds at high speed.
(1) For branches and trees
(2) For grass and weeds
(3) Direction of cutting
(4) Direction of rotation
(2) For grass and weeds
(3) Direction of cutting
(4) Direction of rotation
Operating at low speed makes it easier for grass, weeds,
or twigs to become caught up in the blades, and also it
makes the shaft and clutch wear down more quickly.
or twigs to become caught up in the blades, and also it
makes the shaft and clutch wear down more quickly.
IMPORTANT
WARNING
OP5
OP6
OP7
6. OPERATION