Ryobi P540B Manuale Utente

Pagina di 28
11
This  product  will  accept  Ryobi  One+  18  V  lithium-ion 
battery packs and Ryobi One+ 18 V nickel-cadmium battery 
packs. 
For complete charging instructions, refer to the Operator’s 
Manual  for  the  battery  packs  and  chargers  listed  in  the 
General Safety Rules.
TO INSTALL BATTERY PAcK
See Figure 6.
  Place the battery pack in your chain saw. Align raised 
rib on battery pack with groove in chain saw’s battery 
port. 
  Make sure the latches on each side of the battery pack 
snap in place and that battery pack is secured in chain 
saw before beginning operation.
TO REMOVE BATTERY PAcK
See Figure 6.
Locate latches on side of battery pack and depress both 
sides to release the battery pack from the chain saw.
OPERATION
cAUTION:
When placing battery pack in your chain saw, be sure 
raised rib on battery pack aligns with groove in chain 
saw's battery port and latches snap in place properly. 
Improper assembly of battery pack can cause damage 
to internal components.
cAUTION:
Remove battery pack from unit. Fill oil tank with Ryobi 
Bar and Chain Lubricant before starting the chain saw. 
Failure to lubricate the chain will cause damage to the 
bar and chain.
cHAIN OIL SYSTEM
See Figure 7.
  Use Ryobi Bar and Chain Lubricant.
 It is formulated to 
perform over a wide temperature range with no dilution 
required.
  NOTE: Do not use dirty, used or otherwise contaminated 
oils. Damage may occur to the bar or chain.
  Carefully pour the bar and chain oil into the tank.
  Check and fill the oil tank when battery is recharged, or 
as needed.
  Depress the oil tank cap several times to pump the oil to 
the chain before starting the saw.
  Depress the oil tank cap ev
ery 0-30 seconds while 
cut-
ting to keep the chain lubricated.
NOTE: It is normal for oil to seep from the saw when not 
in use. To prevent seepage, empty the oil tank after each 
use. When storing the unit for a long period of time (three 
months or longer) be sure the chain is lightly lubricated; this 
will prevent rust on the chain and bar sprocket.
Fig. 7
Fig. 6
BATTERy 
pACK
LATChEs
BATTERy 
pORT