Land Pride RCP2560 Manuale Utente
4
Important Safety Information
RCP2560 & RCPM2560 Series Parallel Arm Rotary Cutter 316-057M
4/28/08
Land Pride
818-229C
Amber Reflectors
12319
818-230C
Red Reflector
12320
818-045C
Warning - Pinch Point Hazard
12326
818-339C
Warning - High
Pressure Fluid
Hazard
Pressure Fluid
Hazard
12121
Safety Labels
Your cutter comes equipped with all safety labels in place. They
were designed to help you safely operate your implement. Read
and follow their directions.
were designed to help you safely operate your implement. Read
and follow their directions.
1.
Keep all safety labels clean and legible.
2.
Replace all damaged or missing labels. To order new
labels go to your nearest Land Pride dealer.
labels go to your nearest Land Pride dealer.
3.
Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
request.
4.
Refer to this section for proper label placement.
To install new labels:
a.
To install new labels:
a.
Clean the area the label is to be placed.
b.
Spray soapy water on the surface where the label is to
be placed.
be placed.
c.
Peel backing from label. Press firmly onto the surface.
d.
Squeeze out air bubbles with the edge of a credit card.