Land Pride RC4015 Manuale Utente
18
Section 1: Assembly & Set-up
RC4015 and RCM4015 Series 2 S/N 944961+ Rotary Cutters 330-845M
10/21/15
Transport Bar, Locked Position
Figure 1-17
Lower Wings
!
DANGER
Refer to Figure 1-17:
1.
1.
Park tractor and cutter on a level surface.
2.
Raise both wings up to release any tension on
transport lock bars (#3).
transport lock bars (#3).
3.
Shut tractor down properly before dismounting. Refer
to “Tractor Shutdown Procedure” on page 13.
to “Tractor Shutdown Procedure” on page 13.
4.
Remove hairpin clip (#1) from both the left and right
cylinder pins (#4).
cylinder pins (#4).
Refer to Figure 1-18:
5.
5.
Rotate end of transport lock bars (#3) to storage
pins (#2) on both left and right wings.
pins (#2) on both left and right wings.
6.
Secure with hairpin clips (#1).
7.
Restart tractor and lower both left and right wings
with tractor hydraulic control lever until both wings
are on the ground.
with tractor hydraulic control lever until both wings
are on the ground.
1
4
3
27921
Transport Bar, Storage Position
Figure 1-18
Driveline Installation
!
DANGER
!
WARNING
!
WARNING
!
WARNING
27923
3
2
1
4