Land Pride RC4015 Manuale Utente
27
Section 3: Operating Instructions
10/21/15
RC4015 and RCM4015 Series 2 S/N 944961+ Rotary Cutters 330-845M
Section 3: Operating Instructions
Startup Checklist
Hazard control and accident prevention are dependent
upon the awareness, concern, prudence, and proper
training involved in the operation, transport, storage, and
maintenance of the Rotary Cutter. Therefore, it is
absolutely essential that no one operates cutter without
first having read, fully understood, and become totally
familiar with the Operator’s Manual. Make sure the
operator has paid particular attention to:
upon the awareness, concern, prudence, and proper
training involved in the operation, transport, storage, and
maintenance of the Rotary Cutter. Therefore, it is
absolutely essential that no one operates cutter without
first having read, fully understood, and become totally
familiar with the Operator’s Manual. Make sure the
operator has paid particular attention to:
•
•
•
•
•
•
Also make sure the operator has completed the
Operating Checklist below before using the cutter.
Operating Checklist below before using the cutter.
Safety Information
!
DANGER
!
DANGER
!
DANGER
Operating Checklist
✔
Check
Page
Make sure all guards, and shields are in place and in
good working condition. Refer to "Important Safety
Information".
good working condition. Refer to "Important Safety
Information".
Follow hook-up and driveline installation instructions.
Refer to "Section 1: Assembly & Set-up".
Refer to "Section 1: Assembly & Set-up".
Make all required adjustments.
Refer to "Section 2: Adjustments".
Refer to "Section 2: Adjustments".
Preform all required maintenance.
Refer to "Section 5: Maintenance & Lubrication".
Refer to "Section 5: Maintenance & Lubrication".
Lubricate cutter and driveline as needed.
Refer to "Lubrication Points".
Refer to "Lubrication Points".
Lubricate all gearboxes and replace oil plugs
properly. Refer to Gearbox Lubrication.
properly. Refer to Gearbox Lubrication.
Check cutter initially and periodically for loose bolts
and pins. Refer to “Torque Values Chart”.
and pins. Refer to “Torque Values Chart”.
!
DANGER
!
DANGER
!
DANGER
!
DANGER
!
DANGER
!
DANGER
!
DANGER
!
DANGER