Land Pride RCB6610 Manuale Utente
32
Section 3: Operating Instructions
RCB6610 & RCBM6610 Series 2 S/N 944730+ Rotary Cutters 330-584M
11/11/12
Transport Lock
The cutter wing will need to be raised before transporting on
a roadway, through narrow gate openings and when
servicing the deck underside.
a roadway, through narrow gate openings and when
servicing the deck underside.
1.
Disengage tractor PTO and wait for cutter blades to
come to a complete stop.
come to a complete stop.
2.
Fold cutter wing fully up with hydraulics. Shut tractor
off and dismount.
off and dismount.
3.
See Figure 3-3: Remove hairpin cotter (#3) from
transport lock pin (#2). Remove transport lock from
storage position (A).
transport lock pin (#2). Remove transport lock from
storage position (A).
Transport Lock, Field Position
Figure 3-3
Transport Lock. Wing Folded Up
Figure 3-4
4.
See Figure 3-4: Insert transport lock pin (#2)
through transport lock holes and slotted holes (B).
Secure lock pin with hairpin cotter (#3).
through transport lock holes and slotted holes (B).
Secure lock pin with hairpin cotter (#3).
NOTE: The wing is controlled with a hydraulic
folding cylinder. Be certain that the wing hydraulics
are attached to the tractor and the hydraulic hoses
are full of oil before proceeding.
folding cylinder. Be certain that the wing hydraulics
are attached to the tractor and the hydraulic hoses
are full of oil before proceeding.
26591
2
1
3
A
26669
Transporting
!
WARNING
!
WARNING
!
WARNING
1.
Select a safe ground speed when transporting from
one area to another. Maximum transport speed for
the Rotary Cutter is 20 mph. DO NOT EXCEED.
one area to another. Maximum transport speed for
the Rotary Cutter is 20 mph. DO NOT EXCEED.
2.
Be sure to reduce tractor ground speed when turning
and leave enough clearance so the cutter does not
contact obstacles such as buildings, trees, or fences.
and leave enough clearance so the cutter does not
contact obstacles such as buildings, trees, or fences.
3.
Always raise cutter wing and set transport lock pin
before traveling on public roadways.
before traveling on public roadways.
4.
When traveling on roadways, transport in such a way
that faster moving vehicles may pass you safely.
that faster moving vehicles may pass you safely.
5.
Shift tractor to a lower gear when traveling over rough
or hilly terrain.
or hilly terrain.
Road Side Cutting
When cutting road sides, Land pride recommends the
Rotary Cutter be equipped with double row chain guards
to stop flying objects and Land Pride’s LED Light Kit to
make operator and equipment more visible. For
additional information, refer to “Safety Guard Options”
on page 39 and “Light Kit Option (LED)” on page 36.
Rotary Cutter be equipped with double row chain guards
to stop flying objects and Land Pride’s LED Light Kit to
make operator and equipment more visible. For
additional information, refer to “Safety Guard Options”
on page 39 and “Light Kit Option (LED)” on page 36.