Land Pride RCB6610 Manuale Utente
52
Section 5: Maintenance & Lubrication
RCB6610 & RCBM6610 Series 2 S/N 944730+ Rotary Cutters 330-584M
11/11/12
23603
Oil Fill/Vent Plug
Oil Level Plug
Oil Drain Plug
24852
Oil Level Plug
Oil Fill/Vent Plug
NOTE: Use a suction or siphon pump to drain gearbox
of oil when there is not an oil drain plug.
of oil when there is not an oil drain plug.
30215
Do Not Overfill
NOTE: Use a suction or siphon pump to drain gearbox
of oil when there is not an oil drain plug.
of oil when there is not an oil drain plug.
8
Hours
8
Hours
Gearbox
Method 1: Unscrew top vented dipstick (#1). Wipe oil
from dipstick and screw dipstick in without tightening.
Unscrew dipstick and check oil on dipstick. If below
bottom level mark, add recommended gear lube through
dipstick hole until oil reaches top mark on dipstick.
Reinstall vented dipstick and tighten.
from dipstick and screw dipstick in without tightening.
Unscrew dipstick and check oil on dipstick. If below
bottom level mark, add recommended gear lube through
dipstick hole until oil reaches top mark on dipstick.
Reinstall vented dipstick and tighten.
Method 2: Remove side oil plug (#2). If oil is below
bottom of plug hole, add recommended gear lube
through top dipstick hole until oil flows out of side plug
hole. Reinstall and tighten side oil plug (#2) and vented
dipstick (#1).
bottom of plug hole, add recommended gear lube
through top dipstick hole until oil flows out of side plug
hole. Reinstall and tighten side oil plug (#2) and vented
dipstick (#1).
Type of Lubrication: 80-90W EP Gear Lube
Quantity = Fill until oil reaches top mark on dipstick or
begins to flow out side plug hole in gearbox.
begins to flow out side plug hole in gearbox.
Divider Box
Instructions: Remove oil level plug. If oil is below bottom
of plug hole, add recommended gear lube through oil
fill/vent plug hole until oil flow out of oil level plug hole.
Reinstall and tighten oil level plug and oil fill/vent plug.
of plug hole, add recommended gear lube through oil
fill/vent plug hole until oil flow out of oil level plug hole.
Reinstall and tighten oil level plug and oil fill/vent plug.
Type of Lubrication: 80-90W EP
Quantity = Fill until oil begins to flow out oil level plug hole
in gearbox.
in gearbox.