Land Pride RCB6610 Manuale Utente
4
Important Safety Information
RCB6610 & RCBM6610 Series 2 S/N 944730+ Rotary Cutters 330-584M
11/11/12
Safety Labels
Your Rotary Cutter comes equipped with all safety labels in
place. They were designed to help you safely operate your
implement. Read and follow their directions.
place. They were designed to help you safely operate your
implement. Read and follow their directions.
1.
Keep all safety labels clean and legible.
2.
Refer to this section for proper label placement. Replace
all damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
all damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
3.
Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
safety labels to be affixed to the replaced component as
818-840C
Danger: Rollover Hazard
1 - Place: Left side of center deck
1 - Place: Left side of center deck
37690
37690
37690
818-130C
Caution! Use 540 RPM PTO only (RC Series cutters)
818-240C
Caution! Use 1000 RPM PTO only (RCM Series cutters)
818-276C
Warning! Rotating Blade Hazard
1 - Place: Left side of center deck
1 - Place: Left side of center deck
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
make sure the correct safety labels are included in the
request.
4.
Refer to this section for proper label placement.
To install new labels:
a.
To install new labels:
a.
Clean surface area where label is to be placed.
b.
Spray soapy water onto the cleaned area.
c.
Peel backing from label and press label firmly onto the
surface.
surface.
d.
Squeeze out air bubbles with edge of a credit card or
with a similar type of straight edge.
with a similar type of straight edge.