Land Pride RCM4015 Manuale Utente

10/21/15

Two skid shoes are mounted on the center section and 
one skid shoe mounted on each wing section. Check all 
skid shoes for wear and replace if necessary. Order only 
genuine Land Pride parts from your local Land Pride 
dealer.

Replace center skid shoes as follows:

1.

Remove 1/2"-13 hex whiz nuts (#4), 1/2" -13 x 1 1/4" 
GR5 carriage bolts (#3), and right-hand center skid 
shoe (#1) from the center deck frame (#2) as shown.

2.

Attach new skid shoe (#1) to cutter with existing 
1/2" hex bolts (#3), and secure with existing 1/2" hex 
whiz nuts (#4). Tighten bolts to the correct torque.

3.

Repeat steps 1 & 2 for left-hand center skid shoe.

Replace wing skid shoes as follows:

1.

Remove 3/8" hex whiz nuts (#3), 3/8" plow bolts (#2), 
and left-hand skid shoe (#1) as shown. 

2.

Plow bolts (#2) should be checked for wear and 
replaced if necessary.

3.

Attach new left-hand skid shoe (#1) to cutter with 
existing 3/8" plow bolts (#3) and secure with 3/8" hex 
whiz nuts. Tighten bolts to the correct torque.

4.

Repeat for the right-hand wing.

Refer to Figure 1-11:
1.

To remove shaft guard (#1) at the spindle gearbox, 
unsnap latches (#2) on both sides of guard (#1) and 
slide shaft guard over driveline to expose driveline 
yoke. Do not unhook safety chain (#3).

2.

When servicing of driveline yoke is completed, return 
shaft guard to its original position and secure with 
latches (#2).

3.

Check safety chain (#3). Make sure it is latched to 
shaft guard mounting plate (#4) and shaft guard (#1).

IMPORTANT: Excessive wear on skid shoes can 
weaken cutter side panels and cause damage that 
will require extensive repairs. Always replace skid 
shoes at the first sign of wearing thin.

27920

1

318-211H

CENTER SKID SHOE (RIGHT HAND)

1

318-212H

CENTER SKID SHOE (LEFT HAND)

27859

1

331-792H

 BEVELED SKID SHOE RH

1

331-793H

 BEVELED SKID SHOE LH

2

802-466C

PLOW BOLT, 3/8" - 16 x 1 1/4" GR5

37618