Land Pride RCM4015 Manuale Utente

10/21/15

All Land Pride Rotary Cutters have been designed and tested and meet rigorous 
voluntary testing procedures according to ISO 4254.

Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.

Shows confidence in gearbox integrity.

Capable of handling heavy cutting applications.

Gearbox bottom seal protection for longer bearing life.

Driveline grease zerks are easier to access.

Reduces drawbar wear by keeping hitch level while going through ditches.

Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.

Allows for a tighter turning radius.

Park jack can be adjusted to be perpendicular to the ground.

Serves as a support rest for the driveline when the cutter is unhooked from the tractor. 
Assist operator when attaching driveline to tractor PTO shaft.

Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint 
allows for 80 degree turns without doing damage to the driveline.

Driveline is sized right for the intended cutting capacity. 
Slip-clutches will slip under load to minimize twist damage to driveline profiles.

Intermediate and wing driveline cross journals are easier to grease.

Allows clean cutting of material. 

Eliminates skipping during turns.

Better discharge of material. Picks up tractor tracks.

Standard thick stump jumper material keeps damage to a minimum.

Reduces accumulation of debris and is easier and faster to clean.

Makes center decks and wing decks stronger.

Increased thickness reduces damage from objects being thrown into deck sidewalls.

Reduces gouging the ground when turning.

Allows 

cutter

 to follow terrain. Ideal for rough ground where hillsides, ditches, and 

hollows can cause uneven cutting.

Larger diameter hinge rod gives greater strength to the 

cutter

 from front to rear, and in 

the hinge area itself.

Wing transport locks will hold wings in the folded position in the event of hydraulic loss.

C

utter

 pulls equally on the rear axle while traveling over rough terrain.

5-Bolt hubs makes the wheel assembly more durable and longer lasting.

Allows water to drain from wheels mounted on folded-up wing. 
Helps prevent paint deterioration and rusting to the wheel rims.

Protects unit from bumps and ground shock.

Wheel spindles can be replaced when damaged without replacing entire axle assembly.

Laminated tires: Eliminates flats.
Air-filled tires: Give better cushion while transporting.
Foam-filled tires: Give better cushion while transporting and can’t go flat.

Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and 
pivots about the tractor drawbar.

Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.

Allows operator to transport on public roads safer.

Keeps blades from damaging the deck.