Land Pride RCM4015 Manuale Utente
4
Important Safety Information
RC4015 and RCM4015 Series 2 S/N 944961+ Rotary Cutters 330-845M
10/21/15
Safety Labels
Your Rotary Cutter comes equipped with all safety labels in
place. They were designed to help you safely operate your
implement. Read and follow their directions.
place. They were designed to help you safely operate your
implement. Read and follow their directions.
1.
Keep all safety labels clean and legible.
2.
Refer to this section for proper label placement. Replace
all damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
all damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
3.
Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
make sure the correct safety labels are included in the
request.
4.
Refer to this section for proper label placement.
To install new labels:
a.
To install new labels:
a.
Clean surface area where label is to be placed.
b.
Spray soapy water onto the cleaned area.
c.
Peel backing from label and press label firmly onto the
surface.
surface.
d.
Squeeze out air bubbles with edge of a credit card or
with a similar type of straight edge.
with a similar type of straight edge.
27583
37901
37901
818-714C
Danger! Crushing Hazard
818-130C
Caution! Use 540 rpm PTO only (RC Series Cutters)
818-240C
Caution! Use 1000 rpm PTO only (RCM Series Cutters)
818-045C
Warning! Pinch Point Warning (1-Place)
Located on the back center axle
Located on the back center axle