Land Pride RCBM6610 Manuale Utente
48
Section 5: Maintenance & Lubrication
RCB6610 & RCBM6610 Series 2 S/N 944730+ Rotary Cutters 330-584M
11/11/12
Long Term Storage
Clean, inspect, service, and make necessary repairs to
the cutter when parking it for long periods and when
parking it at the end of a working season. This will help
ensure the cutter is ready for field use the next time you
hook-up to it.
the cutter when parking it for long periods and when
parking it at the end of a working season. This will help
ensure the cutter is ready for field use the next time you
hook-up to it.
!
DANGER
!
DANGER
1.
Clean off any dirt and grease that may have
accumulated on the cutter and moving parts. Scrape
off compacted dirt from the bottom of deck and then
wash surface thoroughly with a garden hose. A
coating of oil may also be applied to the lower deck
area to minimize oxidation.
accumulated on the cutter and moving parts. Scrape
off compacted dirt from the bottom of deck and then
wash surface thoroughly with a garden hose. A
coating of oil may also be applied to the lower deck
area to minimize oxidation.
2.
Check blades and blade bolts for wear and replace if
necessary. See “Cutter Blade Maintenance” on
page 42.
necessary. See “Cutter Blade Maintenance” on
page 42.
3.
Inspect for loose, damaged, or worn parts, and
adjust or replace as needed.
adjust or replace as needed.
4.
Repaint parts where paint is worn or scratched to
prevent rust. Ask your Land Pride dealer for aerosol
touch-up paint. Paint is also available in touch-up
bottles with brush, quarts, and gallon sizes by adding
TU, QT, or GL to the end of the aerosol part number.
prevent rust. Ask your Land Pride dealer for aerosol
touch-up paint. Paint is also available in touch-up
bottles with brush, quarts, and gallon sizes by adding
TU, QT, or GL to the end of the aerosol part number.
5.
Replace all damaged or missing guarding and
decals.
decals.
6.
7.
Store cutter on a level surface in a clean, dry place.
Inside storage will reduce maintenance and make for
a longer cutter life.
Inside storage will reduce maintenance and make for
a longer cutter life.
8.
Follow all unhooking instructions on page 25 when
disconnecting tractor from cutter.
disconnecting tractor from cutter.
Land Pride Aerosol Touch-up Paint
Part No.
Part Description
821-011C
PAINT LP BEIGE AEROSOL SPRAY CAN
821-002C
PAINT LP BLACK AEROSOL SPRAY CAN
821-054C
PAINT MEDIUM RED AEROSOL SPRAY CAN
821-058C
PAINT GREEN AEROSOL SPRAY CAN
821-066C
PAINT ORANGE AEROSOL SPRAY CAN
Ordering Replacement Parts
Land Pride offers equipment in factory standard beige
color with black highlights. Equipment in special colors
may be purchased in Green, Red, and Orange. Because
of the variety of colors available, special attention must
be given to the part number to prevent ordering the wrong
replacement part. A suffix number corresponding to one
of the colors below must be added at the end of Land
Pride’s part number when ordering a replacement part
with that color. Parts ordered without a suffix number will
be supplied in factory standard colors.
color with black highlights. Equipment in special colors
may be purchased in Green, Red, and Orange. Because
of the variety of colors available, special attention must
be given to the part number to prevent ordering the wrong
replacement part. A suffix number corresponding to one
of the colors below must be added at the end of Land
Pride’s part number when ordering a replacement part
with that color. Parts ordered without a suffix number will
be supplied in factory standard colors.
For example, if you are ordering a replacement part with
part number 555-555C and the existing part is red, then
add the suffix 83 to the end of the number to make the
part number read 555-555C83.
part number 555-555C and the existing part is red, then
add the suffix 83 to the end of the number to make the
part number read 555-555C83.
81 . . . . . . Green
83 . . . . . . Red
83 . . . . . . Red
82 . . . . . . . Orange
86 . . . . . . . Yellow
86 . . . . . . . Yellow