Land Pride RCF2760 and RCF2772 Manuale Utente

12/15/15

The Online Warranty Registration should be completed 
by the dealer at the time of purchase. This information is 
necessary to provide you with quality customer service.

The parts on your Rotary Cutter have been specially 
designed by Land Pride and should only be replaced with 
genuine Land Pride parts. Contact a Land Pride dealer if 
customer service or repair parts are required. Your Land 
Pride dealer has trained personnel, repair parts, and 
equipment needed to service the implement.

Model No. _____________Serial No. ______________

For quick reference and prompt service, record model 
number and serial number in the spaces provided above 
and again on warranty page 33. Always provide model 
number and serial number when ordering parts and in all 
correspondences with your Land Pride dealer. Refer to 
Figure 1 for location of your serial number.

Your dealer wants you to be satisfied with your new 
Rotary Cutter. If for any reason you do not understand 
any part of this manual or are not satisfied with the 
service received, the following actions are suggested:

1.

Discuss the matter with your dealership service 
manager making sure that person is aware of any 
problems you may have and has had the opportunity 
to assist you.

2.

If you are still not satisfied, seek out the owner or 
general manager of the dealership, explain the 
problem, and request assistance.

3.

For further assistance write to:

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

lpservicedept@landpride.com

30947

Land Pride welcomes you to the growing family of new 
product owners.

This Rotary Cutter has been designed with care and built 
by skilled workers using quality materials. Proper 
assembly, maintenance, and safe operating practices will 
help you get years of satisfactory use from this machine. 

The RCF2760 and RCF2772 Series Rotary Cutters are 
designed and built by Land Pride to provide excellent 
cutting performance on gentle slopes, slightly contoured 
right-of-ways, roadsides, pastures, set-aside-acres, 
around the farm, and around town. They are compatible 
with 35 to 130 horsepower tractors with a category I or II 
three-point hitch and 540 RPM PTO speed. The cutters 
are Quick Hitch adaptable and equipped with an ASAE 
category 4 driveline with 4-plate slip-clutch for protection.

RCF27 Series cutters with 1 1/2" to 12" cutting height 
range, can cut through grass, weeds, crops, brush, and 
small trees up to 3 inches in diameter with a blade tip 
speed of 12,384 FPM for the RCF2760 and 14,861 FPM 
for the RCF2772. These units come equipped standard 
with a 3/16" thick heavy-duty stump jumper and 
replaceable bolt-on skid shoes. Optional shields for the 
front are rubber deflector and single chain guard. 
Optional shield for the rear is single chain guard. 

See “Specifications & Capacities” on page 28 and 
“Features & Benefits” on page 30 for additional 
information and performance enhancing options.

This Operator’s Manual is designed to help familiarize 
the operator with safety, assembly, operation, 
adjustments, troubleshooting, and maintenance. Read 
this manual and follow the recommendations to help 
ensure safe and efficient operation. 

The information contained within this manual was 
current at the time of printing. Some parts may change 
slightly to assure you of the best performance.

To order a new Operator’s or Parts Manual, contact 
your authorized dealer. Manuals can also be 
downloaded, free-of-charge, from our website at 
www.landpride.com

“Right” or “Left” as used in this manual is determined by 
facing the direction the machine will operate while in use 
unless otherwise stated.

IMPORTANT: A special point of information related 
to the following topic. Land Pride’s intention is this 
information must be read & noted before continuing. 

NOTE:  A special point of information that the 
operator should be aware of before continuing.