Land Pride RCM5020 Series Dépliant
105
Rotary Cutters, Folding Deck
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
RC5020 and RCM5020 Series
RC5020 & RCM5020
Min. PTO Horse Power
70
Gear Box Horsepower
250 HP Splitter
210 HP Center & wing
210 HP Center & wing
Gear Box Lubrication
Gear Lube 80-90W EP
Cutting Capacity
Up To 3" Material
Machine Weight
6,528 lbs. Approx.
(With single row chain guards, 6 laminated tires, dual axle, 540 CV main driveline)
(With single row chain guards, 6 laminated tires, dual axle, 540 CV main driveline)
Blade Tip Speed
@ 540 RPM
Center blade: 17,377 FPM
Wing blade: 17,329 FPM
Wing blade: 17,329 FPM
@1000 RPM
Center blade: 18,165 FPM
Wing blade:18,317 FPM
Wing blade:18,317 FPM
Tongue Weight
2300 lbs.
Hitch Jack
Standard hand crank
Hitch Type
Pull-Type, Self-Leveling Hitch & Clevis
Cutting Width
Overall Width
Minimum Transport Width
Overall Width
Minimum Transport Width
20’-0”
20’-9 1/2”
8’-9”
20’-9 1/2”
8’-9”
Overall Length
19’-3”
Deck Height
10 1/2”
Cutting Height
2” to 14” High with hydraulic cylinder and stroke control spacers
Deck Material Thickness
3/16”
Side Skirt Thickness
1/4”
Skid Shoes
Wing and Weight Box: Reversible & replaceable
Center Deck: 2 - Replaceable
Blades - 6 (2 per Carrier)
1/2” x 4” Thru-harden free swinging alloy steel with uplift
Blade Overlap
6”
Blade Bolt
Keyed with hardened flat washer & lock nut
3/16” Stump Jumper
3/16” Round dish shaped bolt-on stump-jumper with 1” diamond shaped blade bar
Deck Ring
Optional 1/2” x 3” fully welded
Front & Rear Guards
Optional rubber, single chain or double chain
Heavy Duty
Input Driveline Options
Input Driveline Options
Conventional u-joint ASAE Category 5 with 1 3/8”-21 spline
Constant velocity u-joint ASAE Category 5 with 1 3/8”-21 spline or 1 3/4”-20 spline
Constant velocity u-joint ASAE Category 5 with 1 3/8”-21 spline or 1 3/4”-20 spline
Heavy Duty
Connecting Drivelines
Connecting Drivelines
ASAE Cat. 5 with slip-clutch protection
Tire Options
6” x 21” Laminated tires
or 27” x 7.75” x 15” Used aircraft tires w/wo foam filling
or 15” Rims
or 27” x 7.75” x 15” Used aircraft tires w/wo foam filling
or 15” Rims
Wheel Options
6 or 8 Wheels
Transport Axle
Spring-cushioned on center transport axle
Hubs
Cast iron 5-bolt hubs with tapered roller bearings and with 1 3/4” shafts
Shredder Blades (optional)
Cuts
material into smaller pieces
Colors
Standard color: Beige
Optional colors: Green or Red
Optional colors: Green or Red
318-474S continue on next page
02/03/09