Land Pride RCD1884 Manuale Utente

12/15/15

If the accessory skid shoes are mounted on the cutter 
side skirts, check them for wear and replace as needed. 
Order only genuine Land Pride parts from your local Land 
Pride dealer.

1.

Remove 3/8" hex whiz nuts (#3), flat washers (#4), 
3/8" plow bolts (#2), and skid shoes (#1) as shown. 

2.

Check plow bolts for wear and replaced if necessary.

3.

Attach new skid shoes (#1) to cutter with existing 
3/8" plow bolts (#2), flat washers (#4), and 3/8" hex 
whiz nuts (#3). Tighten nuts to the correct torque.

Clean, inspect, service, and make necessary repairs to 
the cutter when parking it for long periods and when 
parking it at the end of a working season. This will help 
ensure the cutter is ready for field use the next time you 
hook-up to it.

Item Part No.

Part Description

1

312-602D

SKID SHOE

2

802-603C

BOLT, PLOW 3/8" - 16 x 1" GR5

3

803-013C

NUT, LOCK 3/8-16 PLT

4

804-012C

WASHER, FLAT 3/8 SAE PLT

33003

1.

Clean off any dirt and grease that may have 
accumulated on the cutter and moving parts. Scrape 
off compacted dirt from the bottom of deck and then 
wash surface thoroughly with a garden hose. A 
coating of oil may also be applied to the lower deck 
area to minimize oxidation.

2.

Check blades and blade mounting hardware for 
wear. Replace blades and hardware as needed. See 
“Cutter Blade Maintenance” on page 24.

3.

Inspect for loose, damaged, or worn parts and adjust 
or replace as needed.

4.

Repaint parts where paint is worn or scratched to 
prevent rust. Ask your dealer for Land Pride aerosol 
touch-up paint. They are also available in touch-up 
bottles with brush, quarts, and gallon sizes by adding 
TU, QT, or GL to the end of the aerosol part number.

5.

Replace all damaged or missing decals.

6.

Lubricate unit. See “Lubrication” on page 28.

7.

Store cutter on a level surface in a clean, dry place. 
Inside storage will reduce maintenance and make for 
a longer cutter life.

8.

Follow all unhooking instructions on page 23 when 
disconnecting tractor from cutter.

Land Pride offers equipment in factory standard beige 
with black highlights. Equipment may also be purchased 
in Green, Red or Orange. Special attention must be given 
to the part number to prevent ordering the wrong color. A 
suffix number corresponding to one of the colors below 
must be added at the end of the part number. Parts 
ordered without the suffix number will be supplied in 
factory standard colors.

For example, if you are ordering a replacement part with 
part number 555-555C and the existing part is red, then 
add the suffix 83 to the end of the number to make the 
part number read 555-555C83.

Part No.

Part Description

821-011C

PAINT LP BEIGE AEROSOL SPRAY CAN

821-002C

PAINT LP BLACK AEROSOL SPRAY CAN

821-054C

PAINT MEDIUM RED AEROSOL SPRAY CAN

821-058C

PAINT GREEN AEROSOL SPRAY CAN

821-066C

PAINT ORANGE AEROSOL SPRAY CAN