Little Wonder 2/1/1960 Manuale Utente

1.   Open box.  Remove upper handle and cardboard 

insert.

2.   Lay box down with blower housing up.  Use lower 

handle to roll unit out of the box.

3.   Locate hardware package.

4.   Install upper handle to lower handle with (4) 3/8-16 

x 1-3/4 carriage bolts and (4) 3/8-16 flanged nylon 

insert nuts from the hardware package.  Tighten the 

nuts securely but not so much as to crush the tube. 

(Figure 1)

5.  

If equipped with a Throttle Cable:  Route the 

throttle cable in front of lower handle crossbar.  

Install to the left side of the upper handle with (2) 

10-32 x ½ thread forming screws from the hardware 

package. (Figure 2)

6.  

 If equipped with a Throttle Cable: Secure the 

throttle cables to the handle tubes with cable ties 

from the hardware package.  Trim off excess.  

(Figure 3)

7.   Fill the engine with oil to the level indicated on the 

dipstick.  Fill the fuel tank with clean, fresh regular 

grade unleaded gasoline.