RedMax HBZ2601 Manuale Utente

1. Open the fastener of the dust bag.
2. Insert the elbow convex groove into the dust bag

elbow opening.
Continue to push the elbow convex groove until
the convex hits against the dust bag opening.
Close the dust bag fastener.

3. Fit the elbow groove with discharge port

projection, turn the elbow and mount the dust bag
to the main unit.

■ DUST COLLECTING OPERATION

• Put the dust bag belt on the shoulder, and adjust the

length of the belt so as to permit easy operation.

• Confirm that the dust bag is not twisted, pull the

throttle trigger, and start dust collecting operation.

• Detach the dust bag from the main unit when it is full

of dust, open the dust bag fastener, and dispose of
dust.

• It will lead to an electric shock or burn.

• Never suck in large wood chips, metal, glass, small

stones or other foreign materials.

• A filled dust bag will lessen dust-collecting capacity.

It is advisable to discharge dust before it becomes
too much.