Symbol Technologies LS 3070 Manuale Utente
5-2
LS 3070 Product Reference Guide: Interface Guide
Connecting Base Station to a Host
OCIA and OCR Terminals
The OCIA or OCR port must be activated and referenced by the POS system,
or no communications will take place.
or no communications will take place.
Figure 5-1. Connecting Base Station to OCIA/OCR Terminals
These include:
OCR
IBM 3653/3683/3684, Fujitsu 7770/7880/7990/8770/9000.
OCIA
NCR 2151/2152/2154/2155/2157/2126/2126-1120/2950/7050/7052,
Nixdorf 8812, ICL 9505/9507/9518.
Nixdorf 8812, ICL 9505/9507/9518.
The OCIA port on some terminals, specifically the NCR 2950, 2152 and 2257,
may not be accessible from the exterior of the unit. These terminals must be
opened and the base station cable connected to the OCIA port on the main
processor board.
may not be accessible from the exterior of the unit. These terminals must be
opened and the base station cable connected to the OCIA port on the main
processor board.
Note:
Some of the above terminals may also be connected as POS keyboard
wedges. See specific installation instructions beginning on
.
POS Terminal
Base Station