Cooper Lighting J/E-PSW-FX-02 Manuale Utente

#8-32 x3/8"

Hex bolt

Exploded view and part call-out

(2x)

Fixture head

. Replace canopy and secure using both set screws.

Set screw

(2x)

1/4-20 x4"

Canopy

(2x)

Wiring the fixture

assembly

Cover plate

1. Remove both 1/4-20 x4 hex bolts from bottom of pendant.

2. Remove both #8-32 x3/8" set screws and allow canopy to

slide down pendant.

3. Run wires from J-box into pendant, ensure there is enough

wire to reach cover plate.

4. Using appropriate fasteners, secure fixture to ceiling. Use

additional bracing if necessary.

Sealing the fixture

Attention:

Large fixtures require additional bracing/structure

around J-box to support fixture.

(by others)

J-box

3/8" fasteners

(by others)

Set screw

(2x)

Canopy

Cover plate

#8-32 x3/8"

1/4-20 x4

Hex bolts

(2x)

properly matched

Hex bolts

Slide fixture assembly onto pendant and secure with both

Secure cover plate

1/4-20 x4

Cover plate

2. Attach appropriate wires and ensure all connections are

1/4-20 x4 hex bolts.

1. To seal fixture, ensure door is secured with provided socket

cap screws. Secure #6-32 x1/2" socket cap screws above door

latches.

2. Secure #6-32 x5/8" socket cap screws into bottom of door.

3. Refer to supplementary sheets for torque specs and aiming

instructions.

Securing pendant to ceiling

(3x)

Socket cap screws

#8-32 x1/2"

(2x)

Socket cap screws

#8-32 x5/8"

Cover plate

gasket

Wire seal

Visor and Non-Visor

performed by a certified electrician.

Warning

that all sources of power are turned off. All

Sheet 1 of 3

: Before starting any work ensure

work must meet local/national codes and be

Do not

mount fixtures vertically.

Installation Instructions

Vault

C-Scroll

Roundel

These installation instructions are valid with the above Ametrix styles.

Large, OUTDOOR

P2R

(Pendant, 2-way, Remote ballast)

ADY071474 REV A(ECN070347)