Chauvet 3030504 Manuale Utente
4BAR™ Flex User Manual (Rev. 3)
Page 13 of 17
Footswitch
Operation
The included footswitch provides quick access to the preset colors, color change
programs, and triggering via the onboard microphone on the 4BAR™ Flex:
programs, and triggering via the onboard microphone on the 4BAR™ Flex:
1. Power on the fixture.
2. Connect the footswitch to the 4BAR™ Flex via the 4-pin connection cable with plug.
3. Press pedal #1 (Preset) to activate control. When this is operating properly, the
LEDs on the 4BAR™ Flex will light white (first function on pedal #1).
Pedal
Sub-option
Function
1
(Preset)
1 x press
White
2 x press
Red
3 x press
Green
4 x press
Blue
5 x press
Yellow
6 x press
Magenta
7 x press
Cyan
8 x press
Color change every second in a
continuous loop
continuous loop
9 x press
Color change every three seconds in a
continuous loop
continuous loop
2
(Sound On)
1 x press
Sound controlled
3
(Blackout)
1 x press
All LEDs off (blackout)
There is no need to modify any settings for the 4BAR™ Flex before connecting
the footswitch. It will operate properly in any mode.
the footswitch. It will operate properly in any mode.
Plug the master fixture in LAST!
Disconnecting
the Footswitch
In order to properly disconnect the footswitch, please follow these steps:
1. Unplug the footswitch from the 4BAR™ Flex.
2. Turn the power to the fixture off (unplug the power cable).
3. Turn the power to the fixture on again (plug in the power cable), and the fixture will
properly operate on any one of the three modes.