Land Pride AR2596 Manuale Utente

12/09/15

The Online Warranty Registration should be completed 
by the dealer at the time of purchase. This information is 
necessary to provide you with quality customer service.

The parts on your Pasture Aerator have been specially 
designed by Land Pride and should only be replaced with 
genuine Land Pride parts. Contact a Land Pride dealer if 
customer service or repair parts are required. Your Land 
Pride dealer has trained personnel, repair parts, and 
equipment needed to service the implement.

Model No. _____________Serial No. ______________

For quick reference and prompt service, record model 
and serial number in the spaces provided above and 
again on warranty page 25. Always provide model and 
serial number when ordering parts and in all 
correspondences with your Land Pride dealer. Refer to 
Figure 1 for the location of your serial number plate.

Your dealer wants you to be satisfied with your new 
Aerator. If for any reason you do not understand any part 
of this manual or are not satisfied with the service 
received, the following actions are suggested:

1.

Discuss the matter with your dealership service 
manager making sure that person is aware of any 
problems you may have and has had the opportunity 
to assist you.

2.

If you are still not satisfied, seek out the owner or 
general manager of the dealership, explain the 
problem, and request assistance.

3.

For further assistance write to:

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

lpservicedept@landpride.com

30055

Land Pride welcomes you to the growing family of new 
product owners.

This Pasture Aerator has been designed with care and 
built by skilled workers using quality materials. Proper 
assembly, maintenance, and safe operating practices will 
help you get years of satisfactory use from this machine. 

The Land Pride 25 Series Pasture Aerators are pull type 
Aerators designed to hitch to a standard drawbar or a 
hammer strap type drawbar. They have uses and 
applications in agricultural conservation tillage and 
pasture renovations and are available in 8 ft. and 10 ft. 
widths. The heavy duty knife like tines on the Aerator are 
designed with a twist in them to fracture compacted soil 
as they slice into the ground in a twisting fashion. This 
fracturing of the soil conditions the soil to soak-up run-off 
water faster, allow fertilizer to penetrate deeper into the 
ground and increase oxygen supply to the plant roots. 

The twisted tines are constructed of hardened forged 
steel mounted on a heavy duty rotating shaft that can be 
angled up to 7 1/2

o

 for an aggressive action. Optional 

concrete weights can be added to the Aerator. These 
weights provide significantly increased down pressure on 
the tines.

See “Specifications and Capacities” on page 21 and 
“Features and Benefits” on page 22 for additional 
information and performance enhancing options.

This Operator’s Manual is designed to help familiarize 
the operator with safety, assembly, operation, 
adjustments, troubleshooting, and maintenance. Read 
this manual and follow the recommendations to help 
ensure safe and efficient operation. 

The information contained within this manual was 
current at the time of printing. Some parts may change 
slightly to assure you of the best performance.

To order a new Operator’s or Parts Manual, contact 
your authorized dealer. Manuals can also be 
downloaded, free-of-charge, from our website at 
www.landpride.com

“Right” or “Left” as used in this manual is determined by 
facing the direction the machine will operate while in use 
unless otherwise stated.

IMPORTANT: A special point of information related 
to the following topic. Land Pride’s intention is this 
information must be read & noted before continuing. 

NOTE:  A special point of information that the 
operator should be aware of before continuing.