Kompernass KH4223 Manuale Utente

- 1 -

Safety instructions

Do not permit children to handle electrical 

• 

appliances without supervision - they 

cannot correctly assess the potential 

risks of injury.

Before taking the figure into use, ALWAYS 

• 

check it for visible damage. Only connect 

the rope light to electrical mains power 

when it is in a faultless condition. Should 

the rope light show any signs of damage, 

contact the Service Centre listed below.

Do not use sharp or pointed objects, 

such as wire or pegs, for securing the 

figure.

The rope light may not be connected 

electrically with another rope light.

Do not flex the rope light, this could 

• 

damage it.

Avoid causing any damage to the insu-

• 

lation! IMMEDIATELY take the rope light 

out of use should the insulation become 

damaged. 

The power cable cannot be repaired. 

• 

In the event of damage to the power 

cable, the appliance must be made 

unusable and correctly disposed of.

ALWAYS first remove the plug from the 

• 

wall socket before starting to clean the 

rope light figure.

NEVER submerse the illuminated figure 

• 

in water. Wipe it only with a slightly 

damp cloth.

Position the illuminated figure in loca-

• 

tions at least 2 meters away from water 

reservoirs or containers. Avoid locations 

that could become flooded after heavy 

rainfall.

3D-ILLUMINATED 

CHRISTMAS 

DECORATION

Read these operating instructions carefully 

before using the appliance for the first time 

and preserve this booklet for later reference. 

Pass this booklet on to whoever might 

acquire the appliance at a future date.

Intended Use

This 3D Illuminated Figure is intended exclu-

sively for decorative purposes in domestic 

indoor and outdoor areas and is not intended 

for utilisation in commercial or industrial 

applications. No warranty claims will be 

approved for damage resulting from 

improper use!

Items supplied

3D Illuminated Figure

4 Ground spikes

Operating instructions

Technical data

Operating voltage:  220 - 240 V ~ 50 Hz

Light source: 

 

6,5 V ~ 70 mA

 

 

 

(= 0,455 W)

Power consumption: KH4218 = 100.8 W

 

 

 

KH4219 = 84 W

 

 

 

KH4220 = 134.4 W

 

 

 

KH4221 = 67.2 W

 

 

 

KH4222 = 100.8 W

 

 

 

KH4223 = 117.6 W

Protection class:   

IP44 

   

(spray-water 

protected)

Safety class: 

 

II 

IB_KH4218_23_32998_LB6.indd   1

IB_KH4218_23_32998_LB6.indd   1

18.06.2009   8:37:50 Uhr

18.06.2009   8:37:50 Uhr