Snapper LT-200 Manuale Utente

23

Regular Maintenance

Service Interval: Before each use, and every 8 hours.

1. Turn the engine off, and set the parking brake to

PARK.

2. Clean the area around the dip stick (C, Figure 22 or

23).

3. Remove the dip stick (C) and clean it with a paper

towel.

4. Insert the dip stick (C) back into the engine.  Briggs &

Stratton Models, thread the cap back onto the tube.
Kohler Models, push cap (C) firmly into place.

5. Remove the dip stick and read the oil level.  The oil

level should be between the “FULL” and “ADD” marks
(D).  If not, add oil according to the oil
recommendations chart (Figure 25).