Land Pride ZXT54 Pro Dépliant
1
© Copyright 2008
Printed
Before You Start
Your Roll Over Protective Structure is exclusively
designed for your Land Pride ZXT mower. Please read
these installation instructions and your ZXT mower
Operator’s Manual thoroughly before beginning.
Especially read information relating to safety concerns.
Also included in the Operator’s Manual is important
information on operation, adjustment, troubleshooting,
and maintenance for this attachment (some manual
sections do not apply to all accessories).
designed for your Land Pride ZXT mower. Please read
these installation instructions and your ZXT mower
Operator’s Manual thoroughly before beginning.
Especially read information relating to safety concerns.
Also included in the Operator’s Manual is important
information on operation, adjustment, troubleshooting,
and maintenance for this attachment (some manual
sections do not apply to all accessories).
A separate Parts Manual for the Zero Turn Mower is
available free of charge at www.landpride.com or can be
purchased from your nearest Land Pride dealer. Have
the model and serial number of your Zero Turn Mower
handy when placing an order.
available free of charge at www.landpride.com or can be
purchased from your nearest Land Pride dealer. Have
the model and serial number of your Zero Turn Mower
handy when placing an order.
Manual Part Numbers:
• Operator’s Manual . . . . . . . . . . . . . . . . . 357-271M
• Parts Manual . . . . . . . . . . . . . . . . . . . . . 357-271P
General Information
These assembly instructions apply to the following
Accessory kits listed below:
Accessory kits listed below:
357-273A
Folding ROPS W/Seat Belt, ZXT Series
Tools required:
•
•
Safety Glasses
•
Work Gloves
•
Two 11/16" box end or open end wrenches
•
Two 3/4" box end or open end wrenches
Assembly Instructions
!
WARNING
Do not modify the Roll Over Protective Structure in any way.
This Roll Over Protective Structure has been designed
specifically for this machine and any modifications can affect
its performance in the event of a roll over.
This Roll Over Protective Structure has been designed
specifically for this machine and any modifications can affect
its performance in the event of a roll over.
When you see this symbol, the subsequent
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!
!
IMPORTANT: Before you begin, read these
instructions and check to be sure all parts and tools
are accounted for. Please retain these installation
instructions for future reference and parts ordering
information.
instructions and check to be sure all parts and tools
are accounted for. Please retain these installation
instructions for future reference and parts ordering
information.
A detailed listing of parts for this accessory kit is
provided on page 2. Use the list as a checklist to
inventory parts received. Please contact your local Land
Pride dealer for any missing hardware.
provided on page 2. Use the list as a checklist to
inventory parts received. Please contact your local Land
Pride dealer for any missing hardware.
Initial Preparations
1.
Park unit on a flat level surface. Make sure blade
engagement switch is (OFF), both control levers are
fully (OUT), park brake is (ON) and switch key is
turned (OFF) and removed.
engagement switch is (OFF), both control levers are
fully (OUT), park brake is (ON) and switch key is
turned (OFF) and removed.
Seat Belt Assembly (Deluxe Seat Shown)
Suspension Seat Also Includes Seat Belt Mounts (B)
Figure 1
Seat Belt Assembly
Refer to Figure 1
1.
Position seat belt (#1) with push button (A) on the right
hand side so that the button is facing up when folded
over onto the seat.
hand side so that the button is facing up when folded
over onto the seat.
2.
Insert 7/16"-20 x 1 1/2" bolt (#5) through 7/16" flat
washer (#4), seat belt (#1) and hole in mounting
bracket (B).
washer (#4), seat belt (#1) and hole in mounting
bracket (B).
3.
Secure seat belt with 7/16" flat washer (#4) and
7/16" hex nylock nut (#3). Do not tighten nut.
7/16" hex nylock nut (#3). Do not tighten nut.
4.
Rotate seat belt to the approximate angle shown and
tighten nylock nut to 36 ft-lbs. of torque.
tighten nylock nut to 36 ft-lbs. of torque.
5.
Repeat steps 1 through 4 on the left hand side for the
buckle end of the seat belt (#2).
buckle end of the seat belt (#2).
IMPORTANT: Your ZXT mower seat must have seat
belt mounting holes in the back rest side plates. See
Figure 1, balloon (B). If it does not, you will need to
replace your seat with one that does.
belt mounting holes in the back rest side plates. See
Figure 1, balloon (B). If it does not, you will need to
replace your seat with one that does.
25974
ZXT54 Pro & ZXT72 Pro Zero Turn Mowers
ZXT Roll Over Protective Structure
Assembly Instructions
Assembly Instructions
3/31/08
Manual No. 357-274M