Hayter Mowers RZT420H Manuale Utente
Testing the Safety Interlock System
Test the safety interlock system before you use the
machine each time. If the safety system does not
operate as described below, have an Authorized Service
Dealer repair the safety system immediately.
machine each time. If the safety system does not
operate as described below, have an Authorized Service
Dealer repair the safety system immediately.
1. While sitting on the seat, with the control levers in
park position, and move the blade control switch
to On. Try starting the engine; the engine should
not crank.
to On. Try starting the engine; the engine should
not crank.
2. While sitting on the seat, move the blade control
switch to Off. Move either motion control lever
to the center, unlocked position. Try starting the
engine; the engine should not crank. Repeat with
the other motion control lever.
to the center, unlocked position. Try starting the
engine; the engine should not crank. Repeat with
the other motion control lever.
3. While sitting on the seat, move the blade control
switch to Off, and lock the motion control levers in
the park position. Start the engine. While the engine
is running, engage the blade control switch, and rise
slightly from the seat; the engine should stop.
the park position. Start the engine. While the engine
is running, engage the blade control switch, and rise
slightly from the seat; the engine should stop.
4. While sitting on the seat, move the blade control
switch to Off, and lock the motion control levers
in the park position. Start the engine. While the
engine is running, move the motion control levers
to the center, unlocked position, engage the blade
control switch, and rise slightly from the seat; the
engine should stop.
in the park position. Start the engine. While the
engine is running, move the motion control levers
to the center, unlocked position, engage the blade
control switch, and rise slightly from the seat; the
engine should stop.
Driving Forward or Backward
The throttle control regulates the engine speed as
measured in rpm (revolutions per minute). Place
the throttle control in the Fast position for best
performance. Always operate in the full throttle
position.
measured in rpm (revolutions per minute). Place
the throttle control in the Fast position for best
performance. Always operate in the full throttle
position.
The machine can spin very rapidly. The
operator may lose control of the machine
and cause personal injury or damage to the
machine.
operator may lose control of the machine
and cause personal injury or damage to the
machine.
•
Use caution when making turns.
•
Slow the machine down before making
sharp turns.
sharp turns.
Forward
1. Move the levers to the center, unlocked position.
2. To go forward, slowly push the motion control
levers forward (Figure 20).
Figure 20
1.
Park (brake) position
3.
Forward
2.
Center unlock position
4.
Backward
To go straight, apply equal pressure to both motion
control levers (Figure 20).
control levers (Figure 20).
To turn, release pressure on the motion control lever
toward the direction you want to turn (Figure 20).
toward the direction you want to turn (Figure 20).
The farther you move the motion control levers in
either direction, the faster the machine will move in
that direction.
either direction, the faster the machine will move in
that direction.
To stop, pull the motion control levers to neutral.
Backward
1. Move the levers to the center, unlocked position.
2. To go backward, slowly pull the motion control
2. To go backward, slowly pull the motion control
levers rearward (Figure 20).
To go straight, apply equal pressure to both motion
control levers (Figure 20).
control levers (Figure 20).
To turn, release the pressure on the motion
control lever toward the direction you want to turn
(Figure 20).
control lever toward the direction you want to turn
(Figure 20).
To stop, push the motion control levers to neutral.
Stopping the Machine
To stop the machine, move the motion control levers to
neutral and outward to the park position, disengage the
neutral and outward to the park position, disengage the
20