Hayter Mowers RZT420H Manuale Utente
Premaintenance
Procedures
Procedures
Raising the Seat
Make sure the motion control levers are locked in the
park position. Lift the seat forward.
park position. Lift the seat forward.
The following components can be accessed by raising
the seat:
the seat:
•
Serial plate
•
Service decal
•
Seat adjustment knob
•
Fuel filter
•
Fuses
•
Battery cables
Accessing the Engine
Components will be hot if the machine has
been running. If you touch hot components you
may be burned.
been running. If you touch hot components you
may be burned.
Allow the machine to cool before performing
maintenance or touching components under
the hood.
maintenance or touching components under
the hood.
1. Pull the both of the engine cover retainer straps
down and away from the forward facing bends in
the cover rod (Figure 26).
the cover rod (Figure 26).
Figure 26
2. Lift the engine cover away from the machine
(Figure 27) then move the cover rearward to
disengage the tab in the rear of the cover from the
engine guard.
engine guard.
Figure 27
Accessing the Battery
1. Raise the seat.
2. Remove the TORX
®
head fastener retaining the
engine cover bracket to the left cover (Figure 28).
Remove the bracket and allow the cover rod to be
lowered.
Remove the bracket and allow the cover rod to be
lowered.
Figure 28
1.
Left cover
3.
Cover rod
2.
Bracket
4.
Torx head fastener (T25)
3. Remove the TORX
®
head fasteners (T25) securing
the left cover to the frame as shown in Figure 29.
26