Hayter Mowers 455E Manuale Utente
Tipping the mower may cause the fuel to leak
from the carburetor or the fuel tank. Petrol is
extremely flammable, highly explosive, and,
under certain conditions, can cause personal
injury or property damage.
from the carburetor or the fuel tank. Petrol is
extremely flammable, highly explosive, and,
under certain conditions, can cause personal
injury or property damage.
Avoid fuel spills by running the engine dry or by
removing the petrol with a hand pump; never
siphon.
removing the petrol with a hand pump; never
siphon.
3. Tip the mower onto its right side.
4. Remove the dirt and grass clippings with a hardwood
scraper. Avoid burrs and sharp edges.
5. Return the mower to its operating position.
6. Fill the fuel tank.
7. Connect the wire to the spark plug.
Cleaning the Blade Brake
Clutch Shield
Clutch Shield
Service Interval: Every 50 hours
Clean inside the blade brake clutch shield when you
change the engine oil to ensure the best performance
and to prevent parts from degrading or when you
sharpen the blade because you need to remove the blade
in order to remove the shield.
change the engine oil to ensure the best performance
and to prevent parts from degrading or when you
sharpen the blade because you need to remove the blade
in order to remove the shield.
1. Stop the engine and wait for all moving parts to stop.
2. Disconnect the wire from the spark plug (Figure 12).
3. Drain the petrol from the fuel tank; refer to
Emptying the Fuel Tank and Cleaning the Fuel Filter.
4. Tip the mower on its right side.
Tipping the mower may cause the fuel to leak
from the carburetor or the fuel tank. Petrol is
extremely flammable, highly explosive, and,
under certain conditions, can cause personal
injury or property damage.
from the carburetor or the fuel tank. Petrol is
extremely flammable, highly explosive, and,
under certain conditions, can cause personal
injury or property damage.
Avoid fuel spills by emptying the fuel tank as
directed; never siphon.
directed; never siphon.
5. Remove 2 blade nuts, the anti-scalp cup, and the
blade (Figure 35).
6. Loosen the 4 screws that hold the shield in place
Figure 40
1.
Screws (4)
2.
Blade brake clutch shield
7. Remove the shield and brush or blow all the debris
from under the shield and around the blade brake
clutch system.
clutch system.
8. Install the shield.
9. Install the blade, the anti-scalp cup, and the 2 blade
nuts.
10. Return the mower to its operating position.
11. Connect the wire to the spark plug.
27