Husqvarna 216 Manuale Utente

English

 – 13

The cutting height can be adjusted to 10 different positions 
with the cutting height lever.

Combi-unit 25-75 mm

The seat has a jointed attachment on the front edge and can 
be tipped forward.

The seat can also be adjusted lengthways.

Loosen the handles under the seat and adjust it forwards or 
backwards to the desired position.

The engine runs on unleaded petrol with a minimum octane 
rating of 85 (not mixed with oil). We recommend the use of 
biodegradable alkylate petrol. Do not use petrol that contains 
methanol.

Do not fill the tank completely, leave an expansion area of at 
least 2.5 cm (1“).

The release control must be pulled out in order for the 
machine to be moved when the engine is shutoff. Pull the 
controls to the end positions, do not use an intermediate 
position.

•

Pull out the control to disengage the drive system.

•

Push in the control to engage to the drive system.

Rider 216 AWD has one control for the front axle and one 
control for the rear axle.

Should you attempt to drive the machine with the clutch 
controls pulled out it will not move. The drive on the axle is 
disengaged when one of the controls is pulled out.

•

Control drawn out, drive system disengaged.

•

Control depressed, drive system engaged.

The control is positioned on the inside of the left front wheel.

•

Rear control (pulled out), drive system disengaged.

•

Front control (pushed in), drive system engaged.

IMPORTANT!

Do not use the fuel tank as a support area.

IMPORTANT!

Always drive the machine with both clutch controls pressed 
in.