Husqvarna 216 Manuale Utente
24 –
English
Maintenance
Removing the BioClip plug
To change a Combi deck from the BioClip function to a cutting
deck with rear ejection, remove the BioClip plug, which is
located under the unit.
deck with rear ejection, remove the BioClip plug, which is
located under the unit.
•
Put the unit in the service position, see Placing in the
service position.
service position.
Combi 94
•
Loosen the knob and the bolts holding the BioClip plug
and remove the plug.
and remove the plug.
•
Replace the unit in normal position.
Fit the BioClip plug in the reverse order.
Combi 103
•
Remove the three screws holding the BioClip plug, and
remove the plug.
remove the plug.
•
Tip: Fit three full-thread screws M8x15 mm in the screw
holes to protect the threads.
holes to protect the threads.
•
Replace the unit in normal position.
Fit the BioClip plug in the reverse order.
Checking the blades
To achieve the best mowing results it is important that the
blades are undamaged and well-sharpened.
blades are undamaged and well-sharpened.
Check that the blades’ attachment screws are tight.
The blades should be balanced after sharpening.
Damaged blades should be replaced when hitting obstacles
that result in a breakdown. Let the service centre assess
whether the blade can be sharpened or must be replaced.
that result in a breakdown. Let the service centre assess
whether the blade can be sharpened or must be replaced.
IMPORTANT INFORMATION Replacing or sharpening the
blades should be conducted by an authorised service
workshop.
blades should be conducted by an authorised service
workshop.