Husqvarna 216 Manuale Utente

 

6

 

 – 

 

English

 

1

 

Charge the battery for 4 hours at max. 3 amp.

2

Fit steering wheel, seat and any optional 
equipment.

3

Check and adjust tyre pressure. (60 kPa, 0.6 bar, 
9 psi).

4

Adjust cutting unit:

Adjust lift springs (effective weight of cutting unit 
should be 12-15kg / 26.5-33 lb).

Adjust cutting unit so that rear edge is about 2-4 
mm / 1/8” higher than front edge.

Adjust the cutting unit’s cutting height setting so 
that the connection rod is tensed at the lowest 
cutting height.

5

Check that the right amount of oil is in the engine.

6

Check that there is oil in the transmission’s oil 
tank.

7

Connect battery.

8

Fill with fuel and start engine.

9

Check that machine does not move in neutral.

10 Check:

Forward drive.

Reverse drive.

Operation of blades.

Seat safety switch.

Lif lever safety switch.

The safety switch for the hydrostat pedals.

11 Check the engine speed See the Technical data 

section.

12 Check the synchronisation between the front and 

rear wheels. (Only AWD-machines) See the 
workshop manual.

13 Tell customer about:

Needs and benefits of following the service 
schedule.

Servicing and the influence of this journal on the 
second-hand value of the machine.

Range of applications for BioClip.

Complete proof of sale etc.

 

 

Pre-delivery service carried out. No outstanding problems. 
Certified:

 

 

 

 

 

 

 

 

_____________________________________________________________

 

 

Date, mileage, stamp, signature

 

1

 

Change engine oil

2

Change the oil in the gearbox. (Only AWD-
machines)

3

Check the synchronisation between the front and 
rear wheels. (Only AWD-machines)