BCS RTB14544 Manuale Utente
The unit is not cutting level.
• Level deck. Check air pressure of all tires; make sure they are equal. See
tires for maximum inflation.
• Without the engine running, make certain blades are installed identically.
tires for maximum inflation.
• Without the engine running, make certain blades are installed identically.
The engine will not start.
• Disengage blades, turn key switch to the “OFF” position, check battery and
all other electrical connections and inspect spark plug and wire.
• Contact engine manufacturer or qualified mechanic.
all other electrical connections and inspect spark plug and wire.
• Contact engine manufacturer or qualified mechanic.
Engine runs poorly.
• See engine manual.
• Check the throttle adjuster.
• Replace fuel, clean fuel filter and fuel line.
• Check spark plug and gap.
• Check the throttle adjuster.
• Replace fuel, clean fuel filter and fuel line.
• Check spark plug and gap.
Cutter bounces excessively while towing.
• Lower tire pressure.
• Tow at a lower speed.
• Tow at a lower speed.
IF PROBLEMS PERSIST HAVE A Q UALIFIED MECHANIC SERVICE
THE CUTTER. NEVER ATTEMPT TO MAKE AN ADJUSTMENT
THAT YOU ARE NOT SURE IS CORRECT. DOING SO CAN CAUSE
OTHER PROBLEMS.
THE CUTTER. NEVER ATTEMPT TO MAKE AN ADJUSTMENT
THAT YOU ARE NOT SURE IS CORRECT. DOING SO CAN CAUSE
OTHER PROBLEMS.
9
GENERAL TROUBLESHOOTING