American Standard 2772.018W Dépliant
CADET™ 5’ X 42”
WHIRLPOOL & BATHING POOL
HIGH GLOSS ACRYLIC
CADET™ 5’ X 42” WHIRLPOOL & BATHING
POOL
POOL
❏
2772.018W Whirlpool featuring System I
• Acrylic with fiberglass reinforcement
• Pre-leveled tub bottom
• Form-fitted backrest position
• Dual, molded in arm rests
• 1.5 HP single speed, self-draining pump/motor
• Factory installed power cord with plug
• Eight multi-directional and flow-adjustable
• Pre-leveled tub bottom
• Form-fitted backrest position
• Dual, molded in arm rests
• 1.5 HP single speed, self-draining pump/motor
• Factory installed power cord with plug
• Eight multi-directional and flow-adjustable
jets including:
- Two Ideal-flow jets
- Four body massage jets
- Two recessed back-rest jets
- Four body massage jets
- Two recessed back-rest jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater connection
• Two silent air volume controls
• Quick Connect Safe-T-Heater connection
system
• Factory installed and tested whirlpool system
❏
2772.018WC Stay Clean™ Whirlpool Massage
Featuring System I:
Featuring System I:
• Same as 2772.018W except with the
StayClean™ whirlpool system featuring
Antimicrobial AlphaSan®
Antimicrobial AlphaSan®
❏
2772.002 Bathing Pool only
Nominal Dimensions: 1524 x 1067 x 502mm
(60” x 42” x 19-3/4")
(60” x 42” x 19-3/4")
© 2003 American Standard Inc.
BV-24
NOTE: Roughing-in dimensions and product
specifications shown on reverse side of page.
specifications shown on reverse side of page.
Rev. 3/03
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
To Be Specified - Required:
❏
Color:
❏
Bath Filler: (specify finish)
❏
Bath Drain: 1583.470 (specify finish)
To Be Specified - Optional:
❏
Safe-T-Heater*: 9075.120
❏
5 Foot Acrylic Apron: 9360.018(specify color)
❏
5 Foot Apron: 9260.018 (specify color)
❏
Jet Trim Ring Kit: 9860.200-two per kit
(Specify finish)
(Specify finish)
❏
Universal Tile Bead Kit: 751755-100
❏
Grab Bar Kit: 9822.200-two per kit (specify finish)
For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.
please see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
temperature during operation. It will not heat cold water to
desired bathing temperature.