Black Box MPSH16-D20-120V Manuale Utente

 

7.  Branch A Current Usage:  A bank of ten LEDs which light to indicate total 

current usage on Power Circuit A.  The first LED will light when 0% to 9% 

of maximum rated current for the power circuit is being used, and the last 

LED will blink when over 100% of the maximum rated current for the power 

circuit is being used.

8.  Branch B Current Usage:  Same as Item 7 above, except displays values for 

Power Circuit B.  (Not present on MPSH8-S20-120V and  

MPSH8-S20-208+V models.)

3.2. 

Outlet Managed PDU-H Series - Back Panel

As shown in Figure 3.2, the Outlet Managed PDU Back Panel includes the following 

components:

1.  Power Circuit A - Power Inlet:  An IEC320-C20 AC inlet which supplies 

power to Outlet Managed PDU control functions and the Circuit "A" outlets.  

Also includes cable keeper (not shown.)

Note:

2.  Power Circuit B - Power Inlet:  An IEC320-C20 AC inlet which supplies 

power to Outlet Managed PDU control functions and the Circuit "B" outlets.  

Also includes cable keeper (not shown.)  (Not present on MPSH8-S20-120V 

and MPSH8-S20-208+V models.)

3.  Power Circuit A - Switched Outlets:  AC Outlets that can be switched On, 

Off, rebooted or set to default state in response to user commands.

4.  Power Circuit B - Switched Outlets:  Same as Item 3 above.  (Not present 

on MPSH8-S20-120V and MPSH8-S20-208+V models.)

5.  Alarm Indicator Lights:  Two LEDs which light when an alarm condition 

is detected at the corresponding power circuit.  Note that MPSH8-S20-120V 

and MPSH8-S20-208+V models only include one power circuit and one 

Alarm Indicator Light.  For information on Alarm Configuration, please refer 

to Section 7.