Black Box MPSH16-D20-120V Manuale Utente

OUTLET MANAGED PDU



On - Callback ONLY (With Password Prompt): Callbacks will be

performed for accounts that include a Callback Number, and the username/

password prompt will be displayed when the user’s modem answers (users

will be required to re-enter their username/password when their modem

answers.) Accounts that do not include a Callback Number will not be able

to access command mode via modem.

• Callback Attempts: The number of times that the Outlet Managed PDU will

attempt to contact the Callback number. (Default = 3 attempts.)

• Callback Delay: The amount of time that the Outlet Managed PDU will wait

between Callback attempts. (Default = 30 seconds.)

Notes:

• After configuring and enabling Callback Security, you must then

define a callback phone number for each desired user account
(as described in Section 5.5) in order for this feature to function
properly.

• When using the "On - Callback (With Password Prompt)" option,

it is important to remember that accounts that do not include
a callback number will be allowed to access command mode
without callback verification.

5.3.5. Power Source Configuration
The Power Configuration menu allows you to adjust power measurements in order

to obtain a more accurate determination of how much "real power" is being used by

devices connected to the Outlet Managed PDU. Real Power is determined by the

following equation:

Real Power =

(Voltage * Amps) * Power Factor

Power Efficiency

To define Power Configuration parameters, access the command mode using an

account that permits access to Administrator level commands and then activate the

System Parameters Menu.

Notes:

• In the Text Interface, power source configuration parameters are

defined via the Power Configuration menu.

• In the Web Browser Interface, power source configuration

parameters are selected via the System Parameters menu.