Kärcher G 2600 OR Manuale Utente

Step 1
Check oil level.

Oil  level  should  always  be  between  the

“FULL” and “ADD” marks on the dipstick.

Be sure the machine is level when checking

the oil level. (Refer to the engine’s operating

manual for seasonal grades.).

Note: Improper oil levels will cause low oil

sensor to shut off engine.

Fill gas tank with unleaded gasoline.

Do not use leaded gasoline.

Connect the high pressure hose to the unit’s

high pressure outlet.

Step 4
Connect garden hose to unit’s water inlet.

Step 5
Connect  garden  hose  to  the  cold  water

source and turn water on completely.
Never use hot water.

Trigger the gun to eliminate trapped air, wait

for a steady flow of water to emerge from

the spray nozzle.

Open fuel cock.

Turn the STOP SWITCH to the position “I”

(ON).

Set the speed cotrol lever 1/3 of the way

toward the high speed position (H).

Important!
Do not run the engine with a high or low

oil level as this can cause engine damage.
If you have further questions regarding the

engine,  please  refer  to  the  engine’s

operating manual included with the unit.

Step 10
Close the choke lever. (on a warm engine,

leave the choke lever in the open position).

Pull the starter handle.

If  the  engine  fails  to  start  after  3  pulls,

squeeze  the  trigger  gun  to  release

pressure, and repeat step.
After the engine warms up enough to run

smoothly, move choke gradually to OPEN

position and the speed control lever toward

the high speed position (H).
For more details see engine manual.