Ariens 920401 Manuale Utente

GB - 8

•

Pliers

•

Open-end wrenches: 3/8, 7/16, 1/2, 
9/16 in. and/or adjustable wrench

•

Tire gauge

1. Remove the lower and loosen the upper 

hardware on the handlebar assembly.

2. Loosen the hardware on the shift rod.
3. Put the speed selector lever in the sixth 

forward position.

4. Rotate the handlebars into operating 

position.

NOTE: Be careful not to damage cable spring 
hooks when rotating handlebars upward.

5. Install and tighten the hardware on the 

handlebar assembly and shift rod.

.

WARNING: AVOID INJURY. Read 
and understand the entire Safety 
section before proceeding.

WARNING: Dropping or tipping over 
boxed unit could result in personal 
injury or damage to unit.

Figure 3

1. Sno-Tek™ Unit
2. Discharge 

Chute

3. Chute Crank

4. Literature Pack 

with Extra 
Shear Bolts

OS8261

Figure 4 

OS8025

1. Shift Rod
2. Upper and Lower Handlebar 

Hardware

3. Shift Rod Hardware
4. Handlebar