McCulloch 96188000400 Manuale Utente

8

1.   Push key in (Figure 10).

2.   Move choke lever to left position (Figure 11).

3.   Firmly push in the primer 3 times with your thumb, 

holding the primer in a for a second before releasing 

it each time (Figure 12).

NOTE: Remove your glove when you push in the primer 

so that air cannot escape from the primer hole.
IMPORTANT: Do not use the primer or the choke if the 

engine has been running and is hot. Excessive priming 

may flood the engine and prevent it from starting.
4.   Connect an extension cord to the snowthrower and 

plug the other end into a three-hole grounded 120 

volt A.C. receptacle and push the electric-start button 

(Figure 13), or pull the recoil start handle (Figure 14).

NOTE:  Use only a UL-listed, 16-gauge extension cord 

recommended for outdoor use that is not longer than 50 

feet (15 m).

1. Primer

Figure 12

1

Figure 10

1. Key

1

Figure 13

1. Electric start button

1

1. Choke lever

Figure 11

1