Echo PPT-260 Manuale Utente

Cleaning brush 25 or 50 mm (1 or 2 in.)

90030 REPOWER

TM

  Air and Fuel Filter  Kit

1.

Close choke (Cold Start Position [

]). This prevents dirt from

entering the carburetor throat when the air filter is removed. Brush
accumulated dirt from the air cleaner area.

2.

Remove the air cleaner cover. Clean and inspect the element for
damage.  If element is fuel soaked and very dirty, replace.

3.

If element can be cleaned and reused, be certain it:
•properly fits the cavity in the air cleaner cover.
•is installed with the original side out.

NOTE
Carburetor adjustment may be needed after air filter cleaning/
replacement. See Carburetor Adjustment Section.

Level 1.

200-250 mm  (8 - 10 in.) length of wire with one end
bent into a hook, Clean rag, funnel, and an approved
fuel container

Parts Required: 90030 REPOWER

TM

  Air and Fuel Filter  Kit

Fuel is VERY flammable. Use extreme care when mixing, storing or
handling or serious personal injury may result.

1.

Use a clean rag to remove loose dirt from around fuel cap and
empty fuel tank.

2.

Use the “fuel line hook” to pull the fuel line and filter from the tank.

3.

Remove the filter from the line and install the new filter.